The loudspeaker enclosure is made of MDF with variable wall thickness from 20 to 30 mm and internal ribbed stiffeners. The parallel planes are absolutely absent, which contributes to the reduction of negative impact of standing waves at the sound quality. The enclosure walls are covered with a silencer.
The Petrikovskiy decorative painting is manually applied on an outer side of the enclosure and protected by ultra-strong multiply lacquer coating.
The Accuton® speakers (Germany) are used in the loudspeaker systems.
Woofers are 220 mm sized with ceramic membranes. Prominent feature of this model is using of the aluminum demodulating rings in magnetic system, which resulted in getting much lower level of harmonic distortions.
Tweeters have pure ceramic membrane 30 mm in diameter. Prominent feature of this model is using of powerful magnetic system “underhung”, during the work of which sound coil stays within the running clearance of the magnetic system. Due to this the distortions remain at unprecedentedly low level at the sound pressure up to 110 dB
Crossover is assembled from the high-quality components with using the “air” core coils and polypropylene capacitors.
|Sensitivity||86 dB (2.83 V/1m)|
|Maximum power||100 W|
|Working band||35 Hz-22000 Hz|
|Type of low frequency design||bass reflex with back port|
|Woofer||8” ceramic membrane|
|Overall dimension (WxHxD)||400x560x350 mm|
Hand-made Petrikovskiy painting performed in old national Ukrainian traditions
Tweeter with true ceramic 30mm membrane
Underhung motor design for very low distortion
Enclosure made of moister-proof MDF
Deep impregnation with epoxy resin of all surfaces inside and outside
Full absence of parallel planes inside and outside the enclosure
Thickness from 20mm up to 30mm
Multilayer ultra hard lacquer coating
Custom bass-midrange 220mm driver
True ceramic membrane
New underhung Neodymium magnet system with Aluminium shorting ring for very low distortion
Titanium former for midrange resolution
VOLYA emblem made of brass